10 watt, wall mount single outputs of 3.3vdc to 55vdc 80-275vac input operating range 4000vac input to output isolation 4 input plug options ul60601-1 3rd edition approvals all specifcations are typical at nominal input, full load, and 25c unless other - wise noted model number output vdc output amps (max.) output power effciency fl, 230vac ripple & noise total regulation no load consumption single output *ahp1001 (a, b, c, or d)-01 3.3 1.82 6 watts 65% typ. 66 mv p-p 5% 0.2 watts *ahp1001 (a, b, c, or d)-02 5 1.6 8 watts 80% typ. 50 mv p-p 5% 0.3 watts *ahp1001 (a, b, c, or d)-03 6 1.33 8 watts 81% typ. 60 mv p-p 5% 0.3 watts *ahp1001 (a, b, c, or d)-04 10 1.0 10 watts 83% typ. 80 mv p-p 5% 0.3 watts *ahp1001 (a, b, c, or d)-05 12 0.83 10 watts 84% typ. 100 mv p-p 5% 0.3 watts *ahp1001 (a, b, c, or d)-06 15 0.66 10 watts 85% typ. 100 mv p-p 5% 0.3 watts *ahp1001 (a, b, c, or d)-07 18 0.55 10 watts 86% typ. 100 mv p-p 5% 0.3 watts *ahp1001 (a, b, c, or d)-08 24 0.42 10 watts 86% typ. 100 mv p-p 5% 0.3 watts *ahp1001 (a, b, c, or d)-09 30 0.33 10 watts 86% typ. 100 mv p-p 3% 0.3 watts *ahp1001 (a, b, c, or d)-10 36 0.27 10 watts 86% typ. 100 mv p-p 3% 0.3 watts *ahp1001 (a, b, c, or d)-11 48 0.21 10 watts 86% typ. 100 mv p-p 3% 0.3 watts *ahp1001 (a, b, c, or d)-12 55 0.18 10 watts 86% typ. 100 mv p-p 3% 0.3 watts option a option d option b option c * note: the asterisk ( * ) denotes a choice of ac input connectors (a, b, c, or d option; i.e. ahp1001b-101). the options are as follows: a: 2 prong u.s. plug in a slimeline package (good for use in space defcient power strips!) b: 3 prong uk plug c: 2 prong euro plug d: 2 prong u.s. plug in a wallmount package please see mechanical dimensions. medical hpu63bseries 63wexternalmedicalgradepowersupply the hpu63b series of ac/dc switching mode power supplies provide 63 watts of continuous output power . all supplies are ul94v-1 min compliant. all models meet fcc part-18 class b and cispr-11 en55011 class b emission limits and are designed to comply with ansi/aami es 60601-1: 2005(ul/cul 3rd edition), en 60601-1:2006 (tuv/t-mark 3rd edition) and new ce requirements. all units are 100% burned in and tested. features: applications: generalspecification: * wide operating voltage, 80 to 275 vac, 47 to 63 hz * iec-320-c8 input inlet * single output * over voltage and over load protection * medical safety 3rd (iec60601-1 3rd edition) * input to output : 2mopp * energy star 2.0, efficiency level v * class ii system * 3 year warranty * home healthcare equipment * patient monitor * blood pressure system * portable medical devices * ecg machine * : auto recovery * : free air convection * : ul94v-1 * : double insulated, class ii : ansi/aami es 60601-1:2005(ul/cul 3rd edition), en 60601-1:2006 (tuv/t-mark 3rd edition) shortcircuitprotection cooling flammabilityrating protectionclasses *safety electricalcharacteristics: environmental: symbol characteristic condition min. typ. max. unit vac class vac vac hz w a a a a % %/c c rh rh kv kv kv h m g c % ms ms s symbol characteristic condition min. typ. max. unit vins safety approval input voltage range safety approval & specification in label vin input operate voltage range input frequency detail to see fig.1 (derate linearly from 100% load at 90vac to 80% load at 80vac) fi sine wave po output power range see rating chart iil low line input current full load, vin=100vac iih high line input current full load, vin=240vac irl low line input inrush current full load, 25c, cool start, vin=100vac irh high line input inrush current full load, 25c, cool start, vin=240vac efficiency full load, vin=230vac, detail to see rating chart voi line regulation full load, vin=100~120vac or 200~240vac olp over load protection recovers automatically after fault condition is removed ttr time of transient response full load, vin=110vac thu hold-up time full load, vin=100vac ts start-up time full load, vin=100~240vac tc temperature coefficient all condition hv dielectric withstanding voltage (p-s) primary to secondary, limit current <10ma emi to ts ho hs vsg esda esdc mtbf elev vbr emc emission compliance to en55011 (cispr11), en61000-3-2,-3 100 80 47 63 63 1.62 0.72 37 74 see rating chart 110 12 0.3 4000 -10 0 0 2 8 6 100k 5 -40 b 150 70 85 95% 95% 3000 4 2 0.04 1 240 275 operating temperature storage temperature operating humidity storage humidity surge voltage electro static discharge electro static discharge mean time between failure operating altitude (elevation) vibration detail to see fig.2 (derate linearly from 100% load at 40c to 50% load at 70c) 10 ~ 95% rh non-condensing see rating chart all condition air discharge, iec61000-4-2 contact discharge, iec61000-4-2 operating temperature at 25c, calculated per mil-hdbk-217f all condition 10 ~ 500hz, 10min./1cycle, 60min. each along x, y, z axes rohs 2011/65/eu 2 cb en 60601-1 iec 60601-1 s e p approvals: % ovp 112 132 over voltage protection medical grade class ii 10 watt adapter ahp1001 series www.astrodynetdi.com astrodyne usa: 1-800-823-8082 astrodyne pacific: 886-2-26983458
* these are stress ratings. exposure of the devices to any of these conditions may adversely affect long term reliability. proper operation under conditions other than the standard operating conditions is neither warranteed nor implied. input specifications input voltage range (see i/p 80-275 vac (100-240vac nom.) see input derate curve (fig 1) frequency range sine wave, 47-63 hz inrush i, cold start, fl 25c 40a @ 100vac * 100a @ 240vac fl * input current (100vin/240vin) 0.3a max./0.2a max. fl protection class double insulated, class ii output specifications voltage and current see selection chart page 1 line regulation hl-ll 1%, max. fl total regulation see selection chart page 1 ripple/noise (see note) see selection chart page 1 over load protection 110-150% max. auto recovery * short circuit protection auto recovery * transient response 4ms at fl, 110vac start up time 2s, min. at fl, 100vac hold up time 12ms, min. at fl, 100vac temperature coeffcient 0.04%/c physical specifications size l x w x h (inches/mm) 2.2 x 1.73 x 1.08 / 56 x 44 x 27.5mm weight 90g typ. environmental specifications operating temperature -10 to +70c see temp derate curve (fig 2) storage temperature -40 to +85c, 10~95% rh * operating & storage humidity 0% to +95%, non-condensing * cooling free air convection surge voltage 2kv, min. emc emission en55011 (cispr11) en61000-3-2, -3 class b esd contact 6kv, air 8kv iec61000-4-2 vibration 5g min. operating altitude (elevation) 3000m max. 10 ~ 500hz, 10min./1cycle, 60min. each along x, y, z axes mtbf 100,000 hrs, min. mil-hdbk-217f, 25c flammability rating ul94v-1 general specifications isolation i/p-o/p: 4000vac limit current <10ma o/p-ground: 707vdc 60s insulation resistance 20m, 500v, 1s, i/p to o/p effciency at fl & nominal line see selection chart safety ul/cul: ansi/aami es60601- 1:2005 3rd ed. note ripple & noise is measured by using a 20mhz bandwidth limited oscilloscope and terminating each output with a 0.47uf capacitor at fl and nominal line. medical grade class ii 10 watt adapter ahp1001 series www.astrodynetdi.com astrodyne usa: 1-800-823-8082 astrodyne pacific: 886-2-26983458
mechanical dimensions medical hpu10aseries specificationnote: 1. output can provide up to peak load when the power supply starts up. continuous staying in more than rated load is not allowed. 2. at factory, in 60% rated load condition, each output is checked to be within voltage accuracy. 3. line regulation is defined by changing 10% of input voltage from nominal line at rated load. 4. load regulation is defined by changing 40% of measured output load from 60% rated load. 5. ripple & noise is measured by using 20mhz bandwidth limited oscilloscope and terminated each output with a 0.47uf capacitor at rated load and nominal line. 6. hold up time is measured from the end of the last charging pulse to the time which the main output drops down to low limit of main output at rated load and nominal line. 7. efficiency is measured at rated load, and nominal line. 8. the specifics for testing the energy efficiency of this series are outlined in a separate document titled "test method for calculating the energy efficiency of single-voltage interchangeable ac-dc and ac-ac power supplies (august 11, 2004)," which is available on the energy star website. mechanicaldimensions: ( unit: mm ) outputcablerecommend: packing: 1. selected output connectors and wire, please refer to appendix. 2. hpu10a-101~105 are required to use awg#20/4ft output cable. 3. hpu10a-106~112 are required to use awg#24/4ft output cable. 4. the regulation and efficiency will be changed by modified output cable . 1. net weight: 90g approx. 2. optional output connectors available contact sales for details. ratingchart: inputvoltage(vac) load(%) 80 50 60 70 80 90 100 110 100 120 140 160 180 200 220 240 260 280 (fig.1)inputvoltagederatingcurve model no. adjustable voltage range min (vdc) (vdc) (a) (a) (w) (w) (ms) (mvp-p) (%) (%) min max max adjustment maximum output current (based on the output volt.) maximum output power ripple & noise total regulation typ. efficiency no load consumption hold-up time protection mode hpu10a-101 hpu10a-102 3.0 5.0 5.0 6.0 1.20 1.33 2.00 1.60 6 8 66 50 65 80 0.2 0.3 12 12 12 12 12 12 12 12 12 12 12 12 olp olp olp olp olp olp olp olp olp olp olp olp 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 81 83 84 85 86 86 86 86 86 86 5 5 5 5 5 5 5 5 3 3 3 3 60 80 100 100 100 100 100 100 100 100 8 10 10 10 10 10 10 10 10 10 1.33 1.25 0.90 0.76 0.62 0.47 0.37 0.30 0.25 0.20 1.00 0.90 0.76 0.62 0.47 0.37 0.30 0.25 0.20 0.19 8.0 11.0 13.0 6.0 8.0 11.0 13.0 16.0 16.0 21.0 27.0 33.0 40.0 50.0 21.0 27.0 33.0 40.0 50.0 55.0 hpu10a-103 hpu10a-104 hpu10a-105 hpu10a-106 hpu10a-107 hpu10a-108 hpu10a-109 hpu10a-110 hpu10a-111 hpu10a-112 10wexternalmedicalgradepowersupply temperature(c) -10 0 10 0 10 20 30 40 50 60 70 80 90 100 110 20 30 40 50 60 70 80 (fig.2)temperaturederatingcurve medical hpu10bseries specificationnote: 1. output can provide up to peak load when the power supply starts up. continuous staying in more than rated load is not allowed. 2. at factory, in 60% rated load condition, each output is checked to be within voltage accuracy. 3. line regulation is defined by changing 10% of input voltage from nominal line at rated load. 4. load regulation is defined by changing 40% of measured output load from 60% rated load. 5. ripple & noise is measured by using 20mhz bandwidth limited oscilloscope and terminated each output with a 0.47uf capacitor at rated load and nominal line. 6. hold up time is measured from the end of the last charging pulse to the time which the main output drops down to low limit of main output at rated load and nominal line. 7. efficiency is measured at rated load, and nominal line. 8. the specifics for testing the energy efficiency of this series are outlined in a separate document titled "test method for calculating the energy efficiency of single-voltage interchangeable ac-dc and ac-ac power supplies (august 11, 2004)," which is available on the energy star website. mechanicaldimensions: ( unit: mm ) outputcablerecommend: packing: 1. selected output connectors and wire, please refer to appendix. 2. hpu10b-101~105 are required to use awg#20/4ft output cable. 3. hpu10b-106~112 are required to use awg#24/4ft output cable. 4. the regulation and efficiency will be changed by modified output cable . 1. net weight: 90g approx. 2. optional output connectors available contact sales for details. ratingchart: inputvoltage(vac) load(%) 80 50 60 70 80 90 100 110 100 120 140 160 180 200 220 240 260 280 (fig.1)inputvoltagederatingcurve model no. adjustable voltage range min (vdc) (vdc) (a) (a) (w) (w) (ms) (mvp-p) (%) (%) min max max adjustment maximum output current (based on the output volt.) maximum output power ripple & noise total regulation typ. efficiency no load consumption hold-up time protection mode hpu10b-101 hpu10b-102 3.0 5.0 5.0 6.0 1.20 1.33 2.00 1.60 6 8 66 50 65 80 0.2 0.3 12 12 12 12 12 12 12 12 12 12 12 12 olp olp olp olp olp olp olp olp olp olp olp olp 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 81 83 84 85 86 86 86 86 86 86 5 5 5 5 5 5 5 5 3 3 3 3 60 80 100 100 100 100 100 100 100 100 8 10 10 10 10 10 10 10 10 10 1.33 1.25 0.90 0.76 0.62 0.47 0.37 0.30 0.25 0.20 1.00 0.90 0.76 0.62 0.47 0.37 0.30 0.25 0.20 0.19 8.0 11.0 13.0 6.0 8.0 11.0 13.0 16.0 16.0 21.0 27.0 33.0 40.0 50.0 21.0 27.0 33.0 40.0 50.0 55.0 hpu10b-103 hpu10b-104 hpu10b-105 hpu10b-106 hpu10b-107 hpu10b-108 hpu10b-109 hpu10b-110 hpu10b-111 hpu10b-112 10wexternalmedicalgradepowersupply temperature(c) -10 0 10 0 10 20 30 40 50 60 70 80 90 100 110 20 30 40 50 60 70 80 (fig.2)temperaturederatingcurve caution medical hpu10cseries specificationnote: 1. output can provide up to peak load when the power supply starts up. continuous staying in more than rated load is not allowed. 2. at factory, in 60% rated load condition, each output is checked to be within voltage accuracy. 3. line regulation is defined by changing 10% of input voltage from nominal line at rated load. 4. load regulation is defined by changing 40% of measured output load from 60% rated load. 5. ripple & noise is measured by using 20mhz bandwidth limited oscilloscope and terminated each output with a 0.47uf capacitor at rated load and nominal line. 6. hold up time is measured from the end of the last charging pulse to the time which the main output drops down to low limit of main output at rated load and nominal line. 7. efficiency is measured at rated load, and nominal line. 8. the specifics for testing the energy efficiency of this series are outlined in a separate document titled "test method for calculating the energy efficiency of single-voltage interchangeable ac-dc and ac-ac power supplies (august 11, 2004)," which is available on the energy star website. mechanicaldimensions: ( unit: mm ) outputcablerecommend: packing: 1. selected output connectors and wire, please refer to appendix. 2. hpu10c-101~105 are required to use awg#20/4ft output cable. 3. hpu10c-106~112 are required to use awg#24/4ft output cable. 4. the regulation and efficiency will be changed by modified output cable . 1. net weight: 90g approx. 2. optional output connectors available contact sales for details. ratingchart: inputvoltage(vac) load(%) 80 50 60 70 80 90 100 110 100 120 140 160 180 200 220 240 260 280 (fig.1)inputvoltagederatingcurve model no. adjustable voltage range min (vdc) (vdc) (a) (a) (w) (w) (ms) (mvp-p) (%) (%) min max max adjustment maximum output current (based on the output volt.) maximum output power ripple & noise total regulation typ. efficiency no load consumption hold-up time protection mode hpu10c-101 hpu10c-102 3.0 5.0 5.0 6.0 1.20 1.33 2.00 1.60 6 8 66 50 65 80 0.2 0.3 12 12 12 12 12 12 12 12 12 12 12 12 olp olp olp olp olp olp olp olp olp olp olp olp 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 81 83 84 85 86 86 86 86 86 86 5 5 5 5 5 5 5 5 3 3 3 3 60 80 100 100 100 100 100 100 100 100 8 10 10 10 10 10 10 10 10 10 1.33 1.25 0.90 0.76 0.62 0.47 0.37 0.30 0.25 0.20 1.00 0.90 0.76 0.62 0.47 0.37 0.30 0.25 0.20 0.19 8.0 11.0 13.0 6.0 8.0 11.0 13.0 16.0 16.0 21.0 27.0 33.0 40.0 50.0 21.0 27.0 33.0 40.0 50.0 55.0 hpu10c-103 hpu10c-104 hpu10c-105 hpu10c-106 hpu10c-107 hpu10c-108 hpu10c-109 hpu10c-110 hpu10c-111 hpu10c-112 10wexternalmedicalgradepowersupply temperature(c) -10 0 10 0 10 20 30 40 50 60 70 80 90 100 110 20 30 40 50 60 70 80 (fig.2)temperaturederatingcurve c a u ti o n medical hpu10dseries specificationnote: 1. output can provide up to peak load when the power supply starts up. continuous staying in more than rated load is not allowed. 2. at factory, in 60% rated load condition, each output is checked to be within voltage accuracy. 3. line regulation is defined by changing 10% of input voltage from nominal line at rated load. 4. load regulation is defined by changing 40% of measured output load from 60% rated load. 5. ripple & noise is measured by using 20mhz bandwidth limited oscilloscope and terminated each output with a 0.47uf capacitor at rated load and nominal line. 6. hold up time is measured from the end of the last charging pulse to the time which the main output drops down to low limit of main output at rated load and nominal line. 7. efficiency is measured at rated load, and nominal line. 8. the specifics for testing the energy efficiency of this series are outlined in a separate document titled "test method for calculating the energy efficiency of single-voltage interchangeable ac-dc and ac-ac power supplies (august 11, 2004)," which is available on the energy star website. mechanicaldimensions: ( unit: mm ) outputcablerecommend: packing: 1. selected output connectors and wire, please refer to appendix. 2. hpu10d-101~105 are required to use awg#20/4ft output cable. 3. hpu10d-106~112 are required to use awg#24/4ft output cable. 4. the regulation and efficiency will be changed by modified output cable . 1. net weight: 90g approx. 2. optional output connectors available contact sales for details. ratingchart: inputvoltage(vac) load(%) 80 50 60 70 80 90 100 110 100 120 140 160 180 200 220 240 260 280 (fig.1)inputvoltagederatingcurve model no. adjustable voltage range min (vdc) (vdc) (a) (a) (w) (w) (ms) (mvp-p) (%) (%) min max max adjustment maximum output current (based on the output volt.) maximum output power ripple & noise total regulation typ. efficiency no load consumption hold-up time protection mode hpu10d-101 hpu10d-102 3.0 5.0 5.0 6.0 1.20 1.33 2.00 1.60 6 8 66 50 65 80 0.2 0.3 12 12 12 12 12 12 12 12 12 12 12 12 olp olp olp olp olp olp olp olp olp olp olp olp 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 81 83 84 85 86 86 86 86 86 86 5 5 5 5 5 5 5 5 3 3 3 3 60 80 100 100 100 100 100 100 100 100 8 10 10 10 10 10 10 10 10 10 1.33 1.25 0.90 0.76 0.62 0.47 0.37 0.30 0.25 0.20 1.00 0.90 0.76 0.62 0.47 0.37 0.30 0.25 0.20 0.19 8.0 11.0 13.0 6.0 8.0 11.0 13.0 16.0 16.0 21.0 27.0 33.0 40.0 50.0 21.0 27.0 33.0 40.0 50.0 55.0 hpu10d-103 hpu10d-104 hpu10d-105 hpu10d-106 hpu10d-107 hpu10d-108 hpu10d-109 hpu10d-110 hpu10d-111 hpu10d-112 10wexternalmedicalgradepowersupply temperature(c) -10 0 10 0 10 20 30 40 50 60 70 80 90 100 110 20 30 40 50 60 70 80 (fig.2)temperaturederatingcurve c a u t i o n ahp1001a ahp1001b ahp1001c ahp1001d dc output connections coaxial plug +vout -vout 5.5mm outer diameter 2.1mm inner diameter, female 11mm length, center + to meet these published specs: ahp1001x-01~05 requires an output cord length of 48 and 20awg wire ahp1001x-06~12 requires an output cord length pf 48 and 24awg wire any deviation from these requirements will change the regulation and effciency of the product medical grade class ii 10 watt adapter ahp1001 series www.astrodynetdi.com astrodyne usa: 1-800-823-8082 astrodyne pacific: 886-2-26983458
derating curves 0315 medical hpu10aseries specificationnote: 1. output can provide up to peak load when the power supply starts up. continuous staying in more than rated load is not allowed. 2. at factory, in 60% rated load condition, each output is checked to be within voltage accuracy. 3. line regulation is defined by changing 10% of input voltage from nominal line at rated load. 4. load regulation is defined by changing 40% of measured output load from 60% rated load. 5. ripple & noise is measured by using 20mhz bandwidth limited oscilloscope and terminated each output with a 0.47uf capacitor at rated load and nominal line. 6. hold up time is measured from the end of the last charging pulse to the time which the main output drops down to low limit of main output at rated load and nominal line. 7. efficiency is measured at rated load, and nominal line. 8. the specifics for testing the energy efficiency of this series are outlined in a separate document titled "test method for calculating the energy efficiency of single-voltage interchangeable ac-dc and ac-ac power supplies (august 11, 2004)," which is available on the energy star website. mechanicaldimensions: ( unit: mm ) outputcablerecommend: packing: 1. selected output connectors and wire, please refer to appendix. 2. hpu10a-101~105 are required to use awg#20/4ft output cable. 3. hpu10a-106~112 are required to use awg#24/4ft output cable. 4. the regulation and efficiency will be changed by modified output cable . 1. net weight: 90g approx. 2. optional output connectors available contact sales for details. ratingchart: inputvoltage(vac) load(%) 80 50 60 70 80 90 100 110 100 120 140 160 180 200 220 240 260 280 (fig.1)inputvoltagederatingcurve model no. adjustable voltage range min (vdc) (vdc) (a) (a) (w) (w) (ms) (mvp-p) (%) (%) min max max adjustment maximum output current (based on the output volt.) maximum output power ripple & noise total regulation typ. efficiency no load consumption hold-up time protection mode hpu10a-101 hpu10a-102 3.0 5.0 5.0 6.0 1.20 1.33 2.00 1.60 6 8 66 50 65 80 0.2 0.3 12 12 12 12 12 12 12 12 12 12 12 12 olp olp olp olp olp olp olp olp olp olp olp olp 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 81 83 84 85 86 86 86 86 86 86 5 5 5 5 5 5 5 5 3 3 3 3 60 80 100 100 100 100 100 100 100 100 8 10 10 10 10 10 10 10 10 10 1.33 1.25 0.90 0.76 0.62 0.47 0.37 0.30 0.25 0.20 1.00 0.90 0.76 0.62 0.47 0.37 0.30 0.25 0.20 0.19 8.0 11.0 13.0 6.0 8.0 11.0 13.0 16.0 16.0 21.0 27.0 33.0 40.0 50.0 21.0 27.0 33.0 40.0 50.0 55.0 hpu10a-103 hpu10a-104 hpu10a-105 hpu10a-106 hpu10a-107 hpu10a-108 hpu10a-109 hpu10a-110 hpu10a-111 hpu10a-112 10wexternalmedicalgradepowersupply 0wuwr01waext wm m wm m wm sm ?m um dm cm gm lm om wmm wwm sm ?m um dm cm gm lm ephiysta0wuwr01wanwr0hpiax1w medical grade class ii 10 watt adapter ahp1001 series www.astrodynetdi.com astrodyne usa: 1-800-823-8082 astrodyne pacific: 886-2-26983458
|
